Festo said on 6 November that at SEMICON Europe 2026 in Munich it will demonstrate end-to-end wafer handling with a networked exhibit cell. The story starts at a FOUP: wafers leave the pod via an inverted gantry that Festo positions as a lower-cost alternative to conventional SCARA robots for storage-to-process moves. An end-effector with an integrated wafer aligner combines grip and positioning to cut footprint and station count.
Before unload, a Festo mass-flow regulator runs a nitrogen FOUP purge. A coating station uses an electric linear axis to track a dispense nozzle across the wafer. For vacuum-style steps such as dry etch, the demo actuates a wafer transfer gate valve with low vibration and particle intent, then a pneumatic pin-lift raises the wafer onto a chuck under force monitoring. A pneumatic micro-positioner places parts such as focus rings at micrometre-level claims. Festo Didactic training and Festo LX digital content are listed alongside the hardware story. The stand is Hall C1, C1337.

A trade-show transfer chamber illustrates a motion architecture. It does not qualify a process tool, publish particle or vibration metrology from a production fab, or replace OEM equipment of record. Use the release as a map of Festo’s semiconductor handling building blocks on display in Munich—not as evidence that a specific line already runs this stack at volume.



