Skip to content

Sector · Robotics · 16 Nov 2026 · Brief

FANUC Europe opens the P-55/15-21A paint line with the R-50iA cabinet

The 5 November six-axis launch lists 15 kg payload, 2,050 mm reach, 0K/1K/2K paint support, and an ATEX Zone 1 external purge enclosure.

Cover · Robotics

By Haluk Kilincer ·

← All analysis

FANUC Europe introduced the P-55/15-21A on 5 November as the first model in a new paint-robot generation for automotive and general industry. The six-axis arm carries a 15 kg payload with 2,050 mm reach and is specified for 0K, 1K, and 2K painting systems so applicators—rotary bell or atomiser—can match the coating chemistry. Right- and left-hand mechanical versions support mirrored booths; floor, wall, angle, and inverted mounts are listed.

Process hardware sits in an external purge enclosure rated for ATEX Zone 1, isolating valve manifolds from flammable mist and VOC during colour changes. The robot is the first FANUC paint model to ship with the R-50iA controller in a single cabinet, with cybersecurity framed to IEC 62443, higher processing performance, and battery-less encoders that remove routine battery swaps. Path programming uses FANUC PaintTool. After a PaintExpo 2026 debut in Karlsruhe, FANUC says the robot is available to manufacturers across Europe. Jan Kamenicky framed the release around process choice, maintenance simplification, and flexible install geometry.

Industrial paint robot spraying a fixture inside a booth

A catalog launch does not publish booth first-pass yield, colour-change minutes, or a named OEM line acceptance. ATEX rating covers the purge enclosure as stated; full booth compliance still sits with the integrator’s risk assessment. Take the P-55 as a new paint mechanical plus R-50iA pairing now offered in Europe—not a claim that every coating line has already migrated.

Share

LinkedIn

More in this sector

Robotics →